| Model | Hot Plate Size (mm) | Clamping Force (mm) | Unit Pressure (MPa) | Motor Power (kW) | Overall Dimensions (approx.) |
|---|---|---|---|---|---|
| XLB-D/Q400x400x2E | 400×400 | 0.5 | 3.1 | 1.5 | 1.5×0.75×1.5 m |
| XLB-D/Q600x600x2D | 600×600 | 1 | 2.78 | 2.2 | 2.0×0.7×1.7 m |
| XLB-D/Q600x600x2 | 600×600 | 1.6 | 4.44 | 2.2 | 2.0×0.7×1.7 m |
| XLB-D/Q450x450/600x2 | 450×450/600 | 1.6 | 7.9/5.9 | 2.2 | 1.8/2.0×0.55×2.1 m |
| XLB-D/Q750x850x2 | 750×850 | 1.6 | 2.5 | 3 | 2.55×0.96×2.1 m |
This machine is specialized for pressing various common, smaller-sized rubber molds, as well as thermoset and thermoplastic molds.
The hydraulic system utilizes a high- and low-pressure combination. During mold closing, the high-flow, low-pressure oil provided by a high-flow, low-pressure pump is primarily used to operate the mold. After mold closing, when the pressure is increased, the low-pressure oil is relieved and overflowed, allowing the low-flow, high-pressure pump to provide the high pressure. This ensures efficient operation while reducing the drive rate, thereby reducing energy consumption and increasing efficiency.
The electric heating system utilizes a thermostat to automatically maintain a constant temperature on the hot platen surface. The heaters are rationally distributed, and the heater structure has been effectively improved.
(Our products and parameters are constantly being improved and optimized. For the latest information, please contact us.)
